pcb l&t torkdisc® system, 16-bit telemetry system, 100k in-lb/8,333 ft-lb(11.3 kn-m) rated capacity, 100% static overload protection, 10,000 rpm max., steel alloy

TORKDISC® Rotary Torque Sensing System

Model 5309D-02A

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

PCB L&T TORKDISC® System, 16-bit telemetry system, 100k in-lb/8,333 ft-lb(11.3 kN-m) rated capacity, 100% static overload protection, 10,000 RPM Max., steel alloy

  • Measurement Range: 100000 in-lb (11298 Nm)
  • Temperature Range: +32 to +185 °F (0 to +85 °C)
  • Torsional Stiffness: 230000 kin-lb/radian (25987 kN-m/radian)
  • Overload Limit: 110000 in-lb (12430 Nm)
  • Housing Material: Plated Steel
  • Weight: 30 lb (13.6 kg)

Specification Notes

[1] Request Technical Note FTQ-STN5 regarding digital output signal.
[2] Extraneous load limits reflect the maximum axial load, lateral load, and bending moment that may be applied singularly without electrical or mechanical damage to the sensor.
[3] Where combined extraneous loads are applied, decrease loads proportionally.
[4] Root sum square of non-linearity, hysteresis, and non repeatability.
[5] Selectable High Pass cutoff frequencies of 5, 10, 20, 200 and 500 Hz.
[6] Selectable Low Pass cutoff frequencies of 10,000, 5000, 2500, 1200, 625 and 313 Hz.
[7] Bolt joint slip torque is calculated assuming a coefficient of friction (µ) of 0.1 and that grade 8 socket head cap screws are used and tightened to 75% of yield.
[8] Bolt joint slip torque is increased from 85,000 in-lbs to 110,000 in-lbs by applying Loctite 638 to the inner 6.000" bolt circle mating surfaces, or using 5/8-11 UNC Supertanium bolts in the 6.000" bolt circle, torqued to 230 ft-lbs.
[9] Supplied with universal AC power adaptor.
[10] See PCB Declaration of Conformance PS069 for details.

English: SI:
Performance
Measurement Range (Full Scale Capacity) 100000 in-lb 11298 Nm
Accuracy ±0.10 % FS ±0.10 % FS [4]
Filter Type (High Pass) 2-pole Butterworth 2-pole Butterworth [5]
Filter Type (Low Pass - Anti Alias) 8-pole Elliptical 8-pole Elliptical [6]
Gain (Channel A) 1 to 16 dB 1 to 16 dB
Gain (Channel B) 0.3 to 1.3 dB 0.3 to 1.3 dB
Voltage Output (channel B - DC coupled) ±10 V ±10 V
Voltage Output (channel A - AC coupled) ±10 V ±10 V
Digital Output QSPI QSPI [1]
Maximum Load (Axial) 10000 lb 44.5 kN [2] [3]
Maximum Load (Lateral) 10000 lb 44.5 kN [2] [3]
Maximum Moment 50000 in-lb 5649 Nm [2] [3]
Frequency Range (-3 dB) 0 to 8500 Hz 0 to 8500 Hz
Environmental
Overload Limit (Bolt Joint Slip) 110000 in-lb 12430 Nm [7] [8]
Overload Limit (Failure) 250000 in-lb 28246 Nm
Overload Limit (Safe) 200000 in-lb 22597 Nm
Temperature Range (Operating) +32 to +185 °F 0 to +85 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (within compensated range) 0.003 %FS/°F 0.0054 %FS/°C
Temperature Effect on Zero Balance (within compensated range) 0.003 %FS/°F 0.0054 %FS/°C
Position Sensitivity (180° rotation of sensor) ≤0.1 % FS ≤0.1 % FS
Electrical
Power Required (50 to 60 Hz) 9 to 18 VDC 9 to 18 VDC [9]
Digital Resolution 16 Bit 16 Bit
Digital Sample Rate 26484 samples/sec 26484 samples/sec
Analog Resolution (based on ±10 V FSO and 16-bit resolution) 0.31 mV 0.31 mV
Physical
Maximum Speed 10000 RPM 10000 RPM
Permissible Axial Float (rotor to stator) 0.25 in 6.4 mm
Permissible Radial Float (rotor to stator) 0.25 in 6.4 mm
Rotating Inertia (without adaptors) 0.874 in-lb/sec2 0.099 N-m/sec2
Dynamic Balance per ISO G 2.5 per ISO G 2.5
Torsional Stiffness 230000 kin-lb/radian 25987 kN-m/radian
Torsional Angle (at Full Scale Capacity) 0.017 ° 0.017 °
Housing Material (Sensor) Plated Steel Plated Steel
Weight 30 lb 13.6 kg

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
100-9161-10 1
182-028A 25-pin(M) D-sub conn. (mating connector for 53xxC Series receiver outputs) 1
8314-06-24A 24-ft long black coaxial cable (RG58/U) ,BNC plug to BNC plug 1